Best cut to length machine hole Suppliers

Company Advantages
1. SUMWIC Machinery cut to length metal has been tested according to the general standards. It is tested in terms of functionality, strength, stiffness, wears, and corrosion. Perfect error protection and short circuit starting protection capabilities can be seen on SUMWIC machines
2. SUMWIC MACHINERY CO., LTD always support its enterprise technical renovation for cut to length machine . SUMWIC winding machine is driven by the constant current circuit
3. This product is eco-friendly and harmless. The materials or parts used in it are guaranteed to meet the environmental protection standards of European and American. All SUMWIC machines are subjected to an extensive quality testing program prior to shipment
4. The hardness on the Mohs scale of this product is good. The Mohs scale is the manifestation of the fastness and stability of its inner structure. SUMWIC machines simultaneously achieve size reduction, high performance and low cost
5. It brings remarkable color effects. The color of the final produced garment would be exactly the same as the sample shown, and the accessories are also of the right color. The roll spool of SUMWIC winding machine adopts step-servo motor

❈ Main Features

Cut To Length Line

1) Automatic 90 degree cutting line for transformer core, and can cover up to the max sheet width of 300mm, the hole size: φ8-25mm.
2) Automatic feeding, punching and cutting with high efficiency and high accuracy.
3) Use tungsten carbide steel cutter with high reliability, the accuracy is ±0. 02mm, and the max cutting speed more than 240 pcs/min.
4) Unique design, compact structure, easy operation and maintenance. Equipped with PLC, HMI touch screen, 3 sets servo motor and imported parts.

❈ Machine Introduction:

Best cut to length machine hole Suppliers-1

Main Unit

SC-series 90 degree cutting line have been designed and built by SUMWIC company, equipped with tungsten carbide steel tools to cut the Non-oriented silicon steel or Oriented silicon steel, and silicon sheet can cover 25-300mm,the accuracy is +/- 0.02mm. The lamination sheet use for electric reactor, inverter and UPS.

Best cut to length machine hole Suppliers-2

Working Table

The conveyor will carry the lamination sheet to the stainless table after cutting the silicon sheet, the table is for the packing and stacking. Besides, equipped with the electronic scale for weigh the lamination sheet.

Best cut to length machine hole Suppliers-3

Decoiler

The decoiler is made of high quality steel, match the motor from overseas with lower noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the main unit, besides, it could forward and reverse the raw material, and the electrical sheet could be back by reverse function. The decoiler with expanded function which is suitable for the different diameter of coil. The decoiler equipped with the leveling unit that make sure the flatness of silicon sheet.

Best cut to length machine hole Suppliers-4

PLC and HMI

Equipped with high performance Delta DVP-E Series control system, which be able to generate accurate output pulse, and make the instruction cycle more faster and stable. The program is designed to integrate sophisticated function to greatly reduce the time used by operator for data input. Besides, the self protecting program for all actions performed by the machine to avoid the damage.

Using 7 inch HMI touch screen, equipped with the ARM9 400MHz CPU, and with clear and user friendly software, which boost the data processing and image display.

Best cut to length machine hole Suppliers-5

Servo Motors

SC-series 90° Strip Cutting Line equipped with three sets servo motors to realize the following actions:

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for hole punching, which supply the power for punch unit, then the silicon sheet will be punched hole, the hole could be change by change the punching unit.

Third servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut silicon sheet.

Best cut to length machine hole Suppliers-6

Tungsten Carbide Cutter

The cutter is made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.

Best cut to length machine hole Suppliers-7

Hole Punching Unit

The hole punching unit with unique design, and it is easy to operate, the hole punch unit can be adjustable.(diameter 8-25mm). Besides, the precision guiding hole and unique design of die set which make hole punching and maintenance became more simple and easy, so don’t need the special training.

Company Features
1. Since inception, SUMWIC MACHINERY CO., LTD has begun to manufacture superiority cut to length machine . In SUMWIC MACHINERY CO., LTD, the production equipment is advanced and the checking and testing methods are complete.
2. SUMWIC MACHINERY CO., LTD uses a unique production process and production technology.
3. High quality cut to length line is provided by SUMWIC Machinery processed by highly advanced cut to length metal technology. At SUMWIC MACHINERY CO., LTD, transformer lamination cutting machine always comes first. Ask online!

❈ Technical Specification

A)Cutting Machine

Model	SC-200	SC-300
Material Width	25~200 mm	25~300 mm
Material Thickness	0.10 ~ 0.50 mm	0.10 ~ 0.50 mm
Hole Size	Ø 8 ~ Ø 20mm	Ø 8 ~ Ø 25mm
Cutting Length	20-9999mm	20-9999mm
Accuracy	±0.1 mm (<1000mm)	±0.1 mm (<1000mm)
Burrs	≤0.02mm	≤0.02mm
Servo Motor	3 Sets	3 Sets
Hole Punch	1	1
Swing Shear	1	1
Electronic Scale	0-200KG	0-200KG
Voltage	380VAC, 50/60Hz or Optional	380VAC, 50/60Hz or Optional
Capacity	3 KW	4 KW
Language	Chinese/English	Chinese/English
Size (LxWxH)	Main Unit: 1500 x 1050 x1300 mm	Main Unit: 1600 x 1100 x1400 mm
	Working Table: 1200 x 800 x860 mm	Stacker: 1200 x 800 x860 mm
	Decoiler: 1700x 900 x 1400 mm	Decoiler:1700x 900 x 1400 mm
Weight	Main Unit: 950 kg	Main Unit:1050 kg
	Working Tabler: 200 kg	Stacker: 250 kg
	Decoiler: 750kg	Decoiler: 800 kg
Floor Space	6.0x1.0m	7.0x1.2m

B)Decoiler

Model	SC-300
Type	Single head
Max. Coils OD	1000mm
Expand Range ID	450-508mm (Standard)
Max. Coils Loading	800kg
Max. Feeding Speed	30m/min
Size (LxWxH)	1700x900x1400mm
Weight	750KG

❈ Product Show

❈ Video Introduction

t******n

A wide range of technologies are used in the production of SUMWIC Machinery transformer lamination cutting machine. Cooling vending machine for drinks, milk, beers, yogurt etc

j******m

SUMWIC Machinery cut to length metal is safe as it is made of high quality materials. Can be customized IC card payment, sound control payment, Alipay, Unionpay, mobile Pay, Credit card pay and other payment methods

y******j

The raw materials of SUMWIC Machinery cut to length line are sourced from the reputed vendors of the market. It is equipped with premium coin changer and bill acceptor

z******y

Our strong supplier relationships allow us to source the highest quality materials to manufacture SUMWIC Machinery transformer lamination cutting machine. It is designed with cooling and heating systems

d******z

The raw materials of SUMWIC Machinery cut to length machine are eco - friendly and safe. Microcomputer control system supports intelligent data statistics, accounting, fault diagnosis and other management functions

f******q

transformer lamination cutting machine is manufactured based on imported food-grade plastics and advanced vacuum rotational molding. It has advantages of strong resistance to corrosion, wear, and impact as well as long service life.

Product Message

*Name

Phone

*E-mail

*Content