Wholesale cut to length line hole Supply

❈ Main Features

Cut To Length Line

1) Automatic 90 degree cutting line for transformer core, and can cover up to the max sheet width of 300mm, the hole size: φ8-25mm.
2) Automatic feeding, punching and cutting with high efficiency and high accuracy.
3) Use tungsten carbide steel cutter with high reliability, the accuracy is ±0. 02mm, and the max cutting speed more than 240 pcs/min.
4) Unique design, compact structure, easy operation and maintenance. Equipped with PLC, HMI touch screen, 3 sets servo motor and imported parts.

❈ Machine Introduction:

Wholesale cut to length line hole Supply-1

Main Unit

SC-series 90 degree cutting line have been designed and built by SUMWIC company, equipped with tungsten carbide steel tools to cut the Non-oriented silicon steel or Oriented silicon steel, and silicon sheet can cover 25-300mm,the accuracy is +/- 0.02mm. The lamination sheet use for electric reactor, inverter and UPS.

Wholesale cut to length line hole Supply-2

Working Table

The conveyor will carry the lamination sheet to the stainless table after cutting the silicon sheet, the table is for the packing and stacking. Besides, equipped with the electronic scale for weigh the lamination sheet.

Wholesale cut to length line hole Supply-3

Decoiler

The decoiler is made of high quality steel, match the motor from overseas with lower noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the main unit, besides, it could forward and reverse the raw material, and the electrical sheet could be back by reverse function. The decoiler with expanded function which is suitable for the different diameter of coil. The decoiler equipped with the leveling unit that make sure the flatness of silicon sheet.

Wholesale cut to length line hole Supply-4

PLC and HMI

Equipped with high performance Delta DVP-E Series control system, which be able to generate accurate output pulse, and make the instruction cycle more faster and stable. The program is designed to integrate sophisticated function to greatly reduce the time used by operator for data input. Besides, the self protecting program for all actions performed by the machine to avoid the damage.

Using 7 inch HMI touch screen, equipped with the ARM9 400MHz CPU, and with clear and user friendly software, which boost the data processing and image display.

Wholesale cut to length line hole Supply-5

Servo Motors

SC-series 90° Strip Cutting Line equipped with three sets servo motors to realize the following actions:

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for hole punching, which supply the power for punch unit, then the silicon sheet will be punched hole, the hole could be change by change the punching unit.

Third servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut silicon sheet.

Wholesale cut to length line hole Supply-6

Tungsten Carbide Cutter

The cutter is made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.

Wholesale cut to length line hole Supply-7

Hole Punching Unit

The hole punching unit with unique design, and it is easy to operate, the hole punch unit can be adjustable.(diameter 8-25mm). Besides, the precision guiding hole and unique design of die set which make hole punching and maintenance became more simple and easy, so don’t need the special training.

❈ Technical Specification

A)Cutting Machine

Model	SC-200	SC-300
Material Width	25~200 mm	25~300 mm
Material Thickness	0.10 ~ 0.50 mm	0.10 ~ 0.50 mm
Hole Size	Ø 8 ~ Ø 20mm	Ø 8 ~ Ø 25mm
Cutting Length	20-9999mm	20-9999mm
Accuracy	±0.1 mm (<1000mm)	±0.1 mm (<1000mm)
Burrs	≤0.02mm	≤0.02mm
Servo Motor	3 Sets	3 Sets
Hole Punch	1	1
Swing Shear	1	1
Electronic Scale	0-200KG	0-200KG
Voltage	380VAC, 50/60Hz or Optional	380VAC, 50/60Hz or Optional
Capacity	3 KW	4 KW
Language	Chinese/English	Chinese/English
Size (LxWxH)	Main Unit: 1500 x 1050 x1300 mm	Main Unit: 1600 x 1100 x1400 mm
	Working Table: 1200 x 800 x860 mm	Stacker: 1200 x 800 x860 mm
	Decoiler: 1700x 900 x 1400 mm	Decoiler:1700x 900 x 1400 mm
Weight	Main Unit: 950 kg	Main Unit:1050 kg
	Working Tabler: 200 kg	Stacker: 250 kg
	Decoiler: 750kg	Decoiler: 800 kg
Floor Space	6.0x1.0m	7.0x1.2m

B)Decoiler

Model	SC-300
Type	Single head
Max. Coils OD	1000mm
Expand Range ID	450-508mm (Standard)
Max. Coils Loading	800kg
Max. Feeding Speed	30m/min
Size (LxWxH)	1700x900x1400mm
Weight	750KG

❈ Product Show

❈ Video Introduction

g******p

cut to length line machine It is refined from high-quality resin materials, with good thermal insulation effect, strong self-cleaning performance and long service life.

x******r

cut to length line machine Excellent material selection, high purity, stable quality, excellent quality, it is a trustworthy food additive product, you can buy and use it with confidence.

m******q

cut to length line The design is simple and elegant, the shape is exquisite and beautiful, the workmanship is fine, the quality is high, and the application range is wide.

x******n

The body of cut to length line machine is designed with large buttons, which is comfortable to the touch, responsive, not easy to be scratched and worn, and has good waterproof and dustproof performance.

a******s

cut to length line The design is reasonable, the workmanship is excellent, the size is standardized, the size is moderate, the texture is soft and comfortable, and it has a good fit.

s******b

The most important function offered by cut to length line machine is cut to length line machine. If something wrong with the machine, Meixin engineers are available to provide service overseas

Product Message

*Name

Phone

*E-mail

*Content