Latest wound core making machine unicore for business for three phase transformer

Product Information of Latest wound core making machine unicore for business for three phase transformer

Product Details

SUMWIC MACHINERY's transformer core cutting machine is processed based on the latest technology. It has excellent performances in the following details.SUMWIC MACHINERY carefully selects quality raw materials. Production cost and product quality will be strictly controlled. This enables us to produce transformer core cutting machine which is more competitive than other products in the industry. It has advantages in internal performance, price, and quality.

Company Advantages
1. Different cutting-edge technologies have been used in SUMWIC Machinery distribution transformer winding machine . It is produced adopting intelligent control, sensing, and servo-drive technology.
2. The quality control technicians perform quality control checks on every article before shipment.
3. We tested it and we had no more leaks - so it works like the charm. So pleased with this. - Said one of our customers.
4. The product only consumes little power energy. There is only a little increase in costs no matter how much water is used.

❈ Main Features

Wound Core Folding Machine

1) Produce DG core, DUO core, Un-cut core, Butt core, Step butt core, Triangle core.
2) More core options and styles allow you to satisfy your customers needs.
3) Produce an unlimited range of sizes. Core dimensions are entered into our software.
4) No more mandrels to make, store, find, fit or get wrong.
5) Smaller, lighter, reduced production floor space.
6) Lower core loss compared to C Cores, E&I and Strip Laminations.
7) Wound Core Folding Machine for transformer core, and cover up to the sheet width 20-400mm, thickness 0.18-0.50mm, length accuracy ± 0.1mm.

❈ Machine Introduction:

Latest wound core making machine unicore for business for three phase transformer-1

Wound Core Folding Machine

SCF-400 Wound Core Folding Machine mainly use in producing rectangular core, such as Butt core, DDG core, DUO core, Un-cut core and Gapped core, it equipped with the latest computer system and servo driver to control the feeding unit, folding unit and cutting unit, and it can process the strip up to 400mm.

For Distribution Transformers, Unicore Technology provides a highly flexible, accurate and reliable production system with all the inherent advantages of wound core technology, such as very low core loss, fast assembly and high output relative to capital investment.

Latest wound core making machine unicore for business for three phase transformer-2

Decoiler

The decoiler is made of high quality steel, match the motor from overseas with small noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the core winder, besides, it can do the positive and negative turn, and the electrical sheet could be back under the negative turn function. The decoiler with expanded function to suitable for the different size sheet coil.

Latest wound core making machine unicore for business for three phase transformer-3

Industrial Computer Control System

Equipped with industrial computer control system instead of the traditional PLC system, which is more powerful, and the arithmetic speed is more faster. The function could be added greatly because of the enormous memory, besides, the software can be updated faster and convenient. This level of industrial computer can withstand bad environment such as high/low temperature or vibration.

Open the computer, user could choose the core type or angle type according to the requirements, then input the size, the computer could calculate the size of core, the class number, sheet number and the space.

In order to make the production convenient, the computer could store 20 groups core size, and user could get it from the computer easily.

Latest wound core making machine unicore for business for three phase transformer-4

Panasonic Servo Motor

SCF-400 Wound Core Folding Machine equipped with four sets Panasonic servo motors to realize the following actions:

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for folding, which supply the power for fold cutter, and could adjust the folding angle by change the mechanical travel.

Third servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut materials.

Latest wound core making machine unicore for business for three phase transformer-5

SESAME Reducer

Equipped with SESAME special reducer from Taiwan, which has high efficiency, lower back lash, and lower noise.

Latest wound core making machine unicore for business for three phase transformer-6

Motion Components

Ballscrews: consist of a screw spindle and a nut integrated with rolling elements that cycle through a return mechanism. Ballscrews convert rotary motion into linear motion, and are most commonly used in industrial machinery and precision machines.

Hiwin precision ballscrews are made through a grinding process of the screw spindle. Precision ground ballscrews provide high positioning accuracy and repeatability, smooth movement and long service life.

Linear guideways: provide a type of linear motion that utilizes re-circulating rolling elements between a profiled rail and a bearing block. The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and are able to take loads in all directions. With these features, a linear guideway can achieve high precision and greatly enhanced moving accuracy.

Latest wound core making machine unicore for business for three phase transformer-7

Tungsten Carbide Tools

The folding tools and cutter both are made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.

Latest wound core making machine unicore for business for three phase transformer-8

Heat Exchanger

In order to reduce the temperature of the control cabinet, we added the industrial heat exchanger for cooling, which could slow down the aging rate of the electrical components and makes the machine run at the best condition.

Company Features
1. Boasting for its high technology and strong technical force, SUMWIC Machinery has gained its wide popularity for years.
2. Our production capacity occupies steadily in the forefront of the wound core making machine industry.
3. SUMWIC MACHINERY CO., LTD offers a whole set of service for rectangular core winding machine. Check it! The service theory of SUMWIC MACHINERY CO., LTD has always been distribution transformer winding machine . Check it! The service philosophy of transformer manufacturing machinery in SUMWIC MACHINERY CO., LTD emphasize on step lap core cutting machine . Check it! With big capacity in our factory, SUMWIC MACHINERY CO., LTD can arrange delivery on time. Check it!

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

SUMWIC 90 Degree strip cutting line SC-200 for electric reactor

SUMWIC 90 Degree strip cutting line SC-200 for electric reactor SC-200 is designed and built for cores of small transformers such as Electric Reactor, Inverters and UPS that made of Grain Oriented or Non-Grain Oriented Silicon Steel to cut 90° shapes (Strip Laminations).MAIN features are: Fully Automatic, High Reliability, Compact Design, Low Operating Cost and High Precision @ Tolerance +/- 0.02mm.Shear Unit on SC Series is made by the industry best tungsten carbide that will guaranty 1 million cutting each time blade grinding.Tungsten carbide cutting tools are very abrasion resistant and can also withstand higher temperatures than standard high speed steel tools.Tungsten carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.

SCF-400 Wound Core Folding Machine for Distribution Transformers.

SCF-400 Wound Core Folding Machine for Distribution Transformers. The SCF-400 Machine is designed and built for the production of Butt core, DG core, DUO core, Uncut core and Gapped core, it equipped with the latest computer system and servo drive to control the feed unit, the cut unit and fold unit. and it can process the strip from 20mm to 400mm.The manufacturing of wound cores is a specialized process, which requires a high degree of precision. These cores are manufactured from selected coils of CRGO electrical steel to yield closely controlled electro-magnetic characteristics and dimensional accuracy.

We Ship RC150-50 CORE WINDER to HOBUT in UK.

We Ship RC150-50 CORE WINDER to HOBUT in UK.HOBUT is a UK manufacturer of instrumentation & control products such as current transformers, digital and analogue meters, transducers and protection relays. And HOBUT Purchase the RC150-50 machine from us in 2021, and they mainly produce the toroidal core and rectangular core.

What are raw materials for toroidal core winder production?

As an important part of producing a superior toroidal core winder, high quality raw materials choice is vital for the producer. Besides that, the raw materials largely determine the product cost, which is among the significant factor taken into buyer's consideration. The quality of raw materials should be attached great importance. This is aimed at strengthening the quality of it. SUMWIC Machinery owns high reputation in the market. core cutting machine produced by SUMWIC MACHINERY CO., LTD is very popular in the market. SUMWIC Machinery transformer winding machine has passed a wide range of tests. They are Chemical Testing, Electrical Safety Testing, Environmental Testing, Mechanical Safety Testing, Performance & Endurance Testing, etc. CNC micro-computer controller allows easier parameters setting on SUMWIC machine. The point of SUMWIC MACHINERY COMPANY is to ensure core winding machine, rather than core winding machine. Perfect error protection and short circuit starting protection capabilities can be seen on SUMWIC machines.SUMWIC MACHINERY COMPANY helps customers to realize their value increase and win long-term development. Inquiry!