automatic core winding machine core series for DG Transformer

❈ Main Features

Wound Core Winding Machine

1) Automatic feeding, guiding, wrapping, winding and cutting.
2) Germany Siemens control system and HMI with high arithmetic speed and powerful functions.
3) Produce both distributed gap core and toroidal core.
4) With vertical 2-9 steps, 1-3 pieces per step.
5) The gas size and feed speed can be adjustable on the HMI.
6) The less labour and less errors by auto wrapping technology.
7) Equipped with tungsten steel cutting units to improve the durability.
8) SMC (Japan) pneumatic components, other electrical components from Europe and Japan.
9) Germany Siemens servo motor , imported servo reducer, linear guideway and bearings.
10) Winding core: OD(Max)=Ø800mm , Height=40-250mm.

❈ Machine Introduction:

SUMWIC Machinery automatic core winding machine series for DG Transformer-1

Wound Core Winding Machine

The RCW800-250 Wound Core Winding Machine is designed and built for the production of toroidal core, toroidal wound core with gap or step-lap, it equipped with the latest computer system and servo drive to control the feed, the cut and winding mechanisms, and it can process the strip up to 250 mm, Max core OD up to 800mm.

For Distribution Transformers provides a highly flexible, accurate and reliable production system with all the inherent advantages of wound core technology, such as very low core loss, fast assembly and high output relative to capital investment.

SUMWIC Machinery automatic core winding machine series for DG Transformer-2

Decoiler

The decoiler is made of high quality steel, match the motor from overseas with small noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the core winder, besides, it can do the positive and negative turn, and the electrical sheet could be back under the negative turn function. The decoiler with expanded function to suitable for the different size sheet coil.

SUMWIC Machinery automatic core winding machine series for DG Transformer-3

PLC and HMI

Equipped with high performance Germany Siemens control system, which be able to generate accurate output pulse, and make the instruction cycle more faster and stable. The program is designed to integrate sophisticated function to greatly reduce the time used by operator for data input. Besides, the self protecting program for all actions performed by the machine to avoid the damage.

Using 12 inch Germany Siemens HIM touch screen, and with clear and user friendly software, which boost the data processing and image display.

SUMWIC Machinery automatic core winding machine series for DG Transformer-4

Siemens Servo Motor

RCW-series Wound Core Winding Machine equipped with three sets Siemens servo motors to realize the following actions:

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut materials.

Third servo motor: it is for winding, the belt drive the main shaft, the torque is strong and the positional accuracy is high

SUMWIC Machinery automatic core winding machine series for DG Transformer-5

Motion Components

Linear guideways: provide a type of linear motion that utilizes re-circulating rolling elements between a profiled rail and a bearing block. The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and are able to take loads in all directions. With these features, a linear guideway can achieve high precision and greatly enhanced moving accuracy.

SUMWIC Machinery automatic core winding machine series for DG Transformer-6

Tungsten Carbide Tools

The cutting tools is made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.

SUMWIC Machinery automatic core winding machine series for DG Transformer-7

Heat Exchanger

In order to reduce the temperature of the control cabinet, we added the industrial heat exchanger for cooling, which could slow down the aging rate of the electrical components and makes the machine run at the best condition.

Company Features
1. SUMWIC MACHINERY CO., LTD is currently the largest research and production base for core winding machine .
2. Considering the economical factor, SUMWIC Machinery is working with the most reliable supplier to provide the most favoured price of the best wound core transformer.
3. SUMWIC Machinery has been exerting itself to being an experienced and technical transformer winding machine supplier. Welcome to visit our factory! The profound enterprise culture of SUMWIC Machinery is beneficial to its development. Welcome to visit our factory!

❈ Technical parameters

A) Wound Core Winding Machine

Model	RCW800-250	RCW1400-400
Material Width	40~250 mm	100~400 mm
Mandrel Diameter	Φ120-750 mm	Φ150-1350 mm
Max. Core OD	Φ800 mm	Φ1400 mm
Material Thickness	0.18 ~ 0.50 mm	0.18 ~ 0.50 mm
Speed	0-80m/min	0-80m/min
Accuracy	<0.5mm	<0.5mm
Servo Motor	3	3
Decoiler	1	1
Voltage	380VAC, 50/60Hz or Optional	380VAC, 50/60Hz or Optional
Capacity	10 KW	15KW
Power Consumption	2 KWH	3 KWH
Language	Chinese/English	Chinese/English
Size (LxWxH)	2500 x 1200 x1700 mm	3600 x 1400 x1800 mm
Weight	1950 kg	2580 kg

B)Decoiler

Model	RCW800-250
Max. Material OD	1200mm
Expand Range ID	450-508mm(Standard)
Max. Loading	1000kg
Max. Feeding Speed	80m/min
Machine Size (LxWxH)	1700x800x1350mm
Package Size (LxWxH)	2000x1100x1750mm
Weight	950KG

❈ Product Show

❈ Video Introduction

h******n

SUMWIC Machinery wound core transformer will be tested to guarantee its quality at the end of the stage. It will be tested by being dipped into or sprayed with different kinds of liquid such as acetic acid and alkaline liquid. With a simple structure, it only requires easy installation and maintenance

l******r

The production standard for SUMWIC Machinery wound core transformer ensures no harmful or toxic chemicals are used throughout the entire process of turning the fiber into the fabric. It is available with a compact or remote version of transmitters

s******o

SUMWIC Machinery transformer winding machine has passed the common electrical safety testing. It includes electric shock hazards testing, flammability testing, heat-related hazards testing, radiation testing, and chemical hazards testing. It is available with a compact or remote version of transmitters

t******q

SUMWIC Machinery transformer core machine is manufactured by utilizing advanced machines. It is processed by a CNC cutting machine, electrical oven, polishing machine, etc. It is made based on the national explosion-proof standard

c******s

SUMWIC Machinery transformer core machine has to go through diverse tests. These tests include fatigue resistance testing, dimensional stability testing, chemical resistance testing, and mechanical testing. It is highly recognized by Sinopec, CNNC, and other large-scale energy companies

j******w

Our transformer core machine is safe during operation. With a smart structure design, no debris will be left in it

Product Message

*Name

Phone

*E-mail

*Content

SUMWIC Machinery automatic core winding machine series for DG Transformer

❈ Main Features

Wound Core Winding Machine

❈ Machine Introduction:

❈ Technical parameters

A) Wound Core Winding Machine

B)Decoiler

❈ Product Show

❈ Video Introduction