Top wound core transformer transformer manufacturers for DG Transformer

❈ Main Features

Wound Core Winding Machine

1) Automatic feeding, guiding, wrapping, winding and cutting.
2) Germany Siemens control system and HMI with high arithmetic speed and powerful functions.
3) Produce both distributed gap core and toroidal core.
4) With vertical 2-9 steps, 1-3 pieces per step.
5) The gas size and feed speed can be adjustable on the HMI.
6) The less labour and less errors by auto wrapping technology.
7) Equipped with tungsten steel cutting units to improve the durability.
8) SMC (Japan) pneumatic components, other electrical components from Europe and Japan.
9) Germany Siemens servo motor , imported servo reducer, linear guideway and bearings.
10) Winding core: OD(Max)=Ø1400mm , Height=100-400mm.

❈ Machine Introduction:

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-1

Wound Core Winding Machine

The RCW1400-400 Wound Core Winding Machine is designed and built for the production of toroidal core, toroidal wound core with gap or step-lap, it equipped with the latest computer system and servo drive to control the feed, the cut and winding mechanisms, and it can process the strip up to 400 mm, Max core OD up to 1400mm.

For Distribution Transformers provides a highly flexible, accurate and reliable production system with all the inherent advantages of wound core technology, such as very low core loss, fast assembly and high output relative to capital investment.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-2

Decoiler

The decoiler is made of high quality steel, match the motor from overseas with small noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the core winder, besides, it can do the positive and negative turn, and the electrical sheet could be back under the negative turn function. The decoiler with expanded function to suitable for the different size sheet coil.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-3

PLC and HMI

Equipped with high performance Germany Siemens control system, which be able to generate accurate output pulse, and make the instruction cycle more faster and stable. The program is designed to integrate sophisticated function to greatly reduce the time used by operator for data input. Besides, the self protecting program for all actions performed by the machine to avoid the damage.

Using 12 inch Germany Siemens HIM touch screen, and with clear and user friendly software, which boost the data processing and image display.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-4

Siemens Servo Motor

RCW-series Wound Core Winding Machine equipped with three sets Siemens servo motors to realize the following actions:

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut materials.

Third servo motor: it is for winding, the belt drive the main shaft, the torque is strong and the positional accuracy is high.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-5

Motion Components

Linear guideways: provide a type of linear motion that utilizes re-circulating rolling elements between a profiled rail and a bearing block. The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and are able to take loads in all directions. With these features, a linear guideway can achieve high precision and greatly enhanced moving accuracy.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-6

Tungsten Carbide Tools

The cutting tools is made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer-7

Heat Exchanger

In order to reduce the temperature of the control cabinet, we added the industrial heat exchanger for cooling, which could slow down the aging rate of the electrical components and makes the machine run at the best condition.

Company Features
1. Concept development and testing is vital in SUMWIC MACHINERY CO., LTD.
2. We aim to minimize the impact of our operations on the environment. We achieve this goal by developing and implementing key environmental programs and mitigating against our material impacts.

❈ Technical parameters

A) Wound Core Winding Machine

Model	RCW800-250	RCW1400-400
Material Width	40~250 mm	100~400 mm
Mandrel Diameter	Φ120-750 mm	Φ150-1350 mm
Max. Core OD	Φ800 mm	Φ1400 mm
Material Thickness	0.18 ~ 0.50 mm	0.18 ~ 0.50 mm
Speed	0-80m/min	0-80m/min
Accuracy	<0.5mm	<0.5mm
Servo Motor	3	3
Decoiler	1	1
Voltage	380VAC, 50/60Hz or Optional	380VAC, 50/60Hz or Optional
Capacity	10 KW	15KW
Power Consumption	2 KWH	3 KWH
Language	Chinese/English	Chinese/English
Size (LxWxH)	2500 x 1200 x1700 mm	3600 x 1400 x1800 mm
Weight	1950 kg	2580 kg

B)Decoiler

Model	RCW1400-400
Max. Material OD	1200mm
Expand Range ID	450-508mm(Standard)
Max. Loading	1000kg
Max. Feeding Speed	80m/min
Machine Size (LxWxH)	1700x800x1350mm
Package Size (LxWxH)	2000x1100x1750mm
Weight	950KG

❈ Product Show

❈ Video Introduction

i******h

SUMWIC Machinery ferrite core transformer winding machine is carefully manufactured. It adopts the latest Computer Numerical Control (CNC) system for accuracy and PC-based controllers for flexibility. KKR artificial stone is easy to install

e******h

For SUMWIC Machinery wound core transformer to be produced, raw materials, water, and additives are required. All primarily related building materials are delivered to the factory and stored properly. KKR artificial stone has been certified under CE/SGS/UV/CUPC

l******s

Each SUMWIC Machinery wound core transformer is tested and checked. It adopts certified and calibrated instruments to finish the tests such as chemical composition tests and environmental tests (hot, cold, vibration, acceleration,etc.) Materials used in artificial stone are up to European standards

g******j

The production of SUMWIC Machinery ferrite core transformer winding machine involves the following concepts: medical device regulations, design controls, medical device testing, risk management, quality assurance. KKR artificial stone boasts high cost-performance ratio

a******h

SUMWIC Machinery ferrite core transformer winding machine has undergone a series of tests before its shipping. These tests include cell-cycle life, impedance measurements, and over-discharging. Water absorption rate of KKR artificial stone stays low

p******t

The product features high efficiency. The ammonia refrigerant used has a prominent cooling capacity, which is better than other refrigerants. KKR artificial stone is well packed to minimize the damage

Product Message

*Name

Phone

*E-mail

*Content

SUMWIC Machinery transformer wound core transformer manufacturers for DG Transformer

❈ Main Features

Wound Core Winding Machine

❈ Machine Introduction:

❈ Technical parameters

A) Wound Core Winding Machine

B)Decoiler

❈ Product Show

❈ Video Introduction