The way to Protect And Maintain Electric Motors
by:SUMWIC Machinery
2020-06-20
Electric motor plays a vital role in the performance of the modern machines. It is responsible for the smooth performance of the toys. If the electric motors are maintained properly, then machine can provide reliable service for quite a while. However, maintaining the motor is no easy task since need to frequently clean the motors. Always remember that electric motors are the heart of the coffee makers.
There are two types of threats pertaining to instance external problems and internal faults on motor that should be accounted while protecting the motors. External damages may be caused due to a few reasons. Some important reasons are single phasing, unbalanced supply voltage, under-voltage, and reverse phase sequence starting. On one other hand, internal faults may occur brought about by internal faults, overload, and bearing failures. When overloading or prolonged operation on unbalanced supply voltage takes place then the first and foremost thing that gets damaged is the motor windings. Single phase operation and overloading are the faulty operations that cause the insulation of the motor to deteriorate until finally a fault occurs within the winding.
Some effective tips that might help you to protect the motors from specific conditions are listed below:
Overloading:
This is one of the several primary conditions that damage the core. Furthermore, regular overloading reduces the lifespan of the motor. You can avoid overloading problems by strictly carrying out an instructions that shows the maximum capacity of the train's motor. This problem mainly affects the windings which became expensive.
Friction:
It is also an important contributing factor for the failure of the windings. If friction occurs, the motor puts additional efforts to restore may well damage the windings. So, use must use lubricants regularly for the smooth functioning of the motor.
Heating:
This occurs once the motor is used continuously for a longer period and when there are no cooling systems to get rid of the heat that is created due to the operation. However, thermal overload relay is needed to determine the thermal capability of your motor. Do not exceed the limiting permissible value of bearing temperature.
Maintenance:
Regular maintenance is called for in the associated with applying lubricating oil. You must also check the air coolers that widely-used to reduce the thermal heating of this motor. Examine the brushes and collector rings periodically because they are important for the effective functioning from the motor. Besides, if you want to perform motor unit repair then always opt for skilled professionals, because small faults that stay unchecked will cause severe damages to the motor.
All these tips might assist you in maintaining electrical motors performance and lifespan efficiently. Most of the motor repairs take place merely because of mishandling and overloading, so while operating motors more care must be ingested.
Custom message